New 472-479khz spectrum allocation for Amateur Radio in Canada – Repost

In case many hams have not heard we do have a new band segment. Jim VE3IQ was very helpful with the team to get IC to allow.

Since Jim went SK and I now hold his call and  I have plans to run a 472 Khz beacon as a project.

Check out the QRPLabs Special its QRP but my initial proof of concept shows some good results. Goal is to cross the pond Marconi style but I will not be using a Spark transmitter. The Ultimate3S version I have does not support the low low band but the deal makes up for it.,,,20,0,0,0::recentpostdate%2Fsticky,,,20,2,0,4737615


 New 472-479khz spectrum allocation for Amateur Radio in Canada

RAC is pleased to announce the official Canadian implementation of the 472-479 kHz band. “Agreed to in 2012 at the World Radio Conference (WRC), and now approved in Canada this is more good news for Canadian amateur radio”, said enthusiastically Geoff Bawden, VE4BAW, and RAC President.

The amateur service is now authorized to use the 472-479 kHz band with the release of the new Canadian Table of Frequency Allocations by Industry Canada.   While approved at WRC 12 by the ITU, each country then must implement regulations for its amateurs before the band is available.  Operations are subject to the international foot notes, which limit power to 5 watts EIRP except in certain areas within 800 km of certain other countries.  Industry Canada release:

This addition to our allocations is especially appropriate given that Industry Canada, with Bryan Rawlings, VE3QN, acting as a representative for both RAC and IARU, lead the charge for this new band at WRC 12.  Of course, WRC 12 was the end of a long process that started many years earlier and many others need to be recognized for their contributions: Industry Canada  which brought together all of the industry players to form consensus, Ken Pulfer VE3PU (SK) who started it all off and provided help and insight throughout the multi-year process, Dave Conn VE3KL did the critical antenna analyses. Jim Dean VE3IQ oversaw getting licenses for 504 – 509 kHz experiments to verify non-interference to power control systems.  Also, Norm Rashleigh VE3LC who guided the favourable responses to the proposed amateur secondary allocation at 472-479 kHz through IC’s Request for Public Consultations on the WRC-12 decisions.  Many others also provided valuable support and work over a seven year process.

Canadian amateur operators have two new segments of spectrum thanks to the very hard work by RAC with our regulator. Five 60 meter band channels were made available by Industry Canada a few months ago.


Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )


Connecting to %s